کیسز / کوالٹی اور حفاظت
کوالٹی اور حفاظت

کنکریٹ کو IS 456 کے مطابق رکھیں، pour card سے cube نتیجے تک

کنکریٹ کے انسپیکشن اور ٹیسٹ پلان کو لکھیں، ہر pour کو شروع ہونے سے پہلے clear کریں، cubes کو اس pour کے خلاف ڈھالیں اور ٹریک کریں جہاں سے وہ آئے، ناکام نتیجے پر صحیح طریقے سے عمل کریں، اور سرٹیفکیٹس کو وہاں رکھیں جہاں handover کو ان کی ضرورت ہوگی۔

5 مراحل20 منٹجنرل کنٹریکٹرپروجیکٹ / تعمیراتی مینجمنٹ فرمخصوصی سب کنٹریکٹرڈیولپر / کلائنٹ

یہ کیسے کام کرتا ہے، قدم بہ قدم

5 قدم پوری پلیٹ فارم میں - ہر قدم پر کیا کرنا ہے اور یہ کیوں اہم ہے۔

1

Write the test plan before the first pour, not after

کوالٹی انتظام

Set out, per grade and per element type, what is checked and when: mix approval, workability at the point of placing, the sampling frequency the code sets by volume placed, the ages at which cubes are tested, curing, and formwork striking. Mark the pre-pour check as a hold point rather than as a notification.

کیوں: A hold point is the only instrument that survives a busy site. A check written as a notification is done when there is time, which on a pour day there is not, and the pour goes ahead because stopping it costs a truck of concrete.

اندر جاتا ہےSpecification and gradesThe code requirements that applyباہر آتا ہےAn inspection and test plan for concreteHold points nobody may pass
2

Clear the pour on the things that disappear

معائنے

Inspect against the plan before concrete is called: bar size, spacing and laps against the schedule, cover blocks in place and of the right thickness, the detailing at joints and confinement zones, formwork line and support, and the element clean. Photograph the reinforcement, and record who cleared it.

کیوں: Everything in that list is invisible an hour later and expensive to verify afterwards. Cover in particular decides how long the structure lasts and cannot be inspected once poured, so the record made at this moment is the only evidence that will ever exist.

اندر جاتا ہےThe element about to be pouredReinforcement drawings and schedulesباہر آتا ہےA cleared pour, with evidenceWhat the reinforcement looked like
3

Cast the cubes and tie them to the element, not to the day

فارمز اور چیک لسٹس

Fill the pour card as the concrete is placed: grade, volume, time, workability reading, weather, and the identification of every cube cast from it, against the element being poured. Record the test ages that fall due from those dates.

کیوں: Cubes identified only by date are useless on a site pouring three elements a day. When a result comes back low, the question is which element it belongs to, and a card that answers that turns a structural investigation into a check of one beam.

اندر جاتا ہےThe pour, its grade and its volumeباہر آتا ہےCubes tied to the element they came fromTest dates falling due
4

Treat a low result as a bounded non-conformance

عدم مطابقت کی رپورٹس

Read the results against the acceptance criteria the code sets, and where they fall short, raise a non-conformance naming the element, the pour and the volume affected. Record the further testing or structural assessment agreed, and who signs off the outcome.

کیوں: A low seven day result is information, not a verdict, and a low twenty-eight day result has a defined route through it. What decides the cost is whether the extent is known. A non-conformance that names one element is a repair; one that cannot say which pour it belongs to becomes a survey of a floor.

اندر جاتا ہےCube results at each ageباہر آتا ہےA non-conformance with a known extentThe route to acceptance or rejection
5

File the certificates against the structure they prove

دستاویزات

Keep the pour cards, the laboratory certificates, the pre-pour clearances and any non-conformance and its closure together, organised by element rather than by month.

کیوں: At handover, and at any later query about the structure, the question is always about a part of the building rather than about a period of time. A file arranged by element answers it in minutes; one arranged by month is searched by somebody who was not there.

اندر جاتا ہےTest certificates and pour cardsباہر آتا ہےA concrete file arranged by element
ماڈیولز

اس سیناریو کے ماڈیولز

5 / 190 پلیٹ فارم ماڈیولز

The market this case is written for

بھارت

Everything in this case follows how construction work is measured, priced and paid for in this market. The forms, the cost breakdown and the payment rules are the ones used there, not a generic version of them.

Standards it follows

  • CPWD DSR
  • IS 456
  • RERA

You do not have to set any of that up by hand. The first time you open the platform it asks which market you work in. Choose this one and it sets the interface language, loads the matching cost database and records the cost classification, and it adds an example project you can open straight away.

The rule checks for this market come with the platform too. Switch them on once and an estimate that misses something the market expects is flagged while you are still working on it, not after the tender has gone out.

کوالٹی اور حفاظت میں مزید

کوالٹی اور حفاظت

Inspect work and close a non-conformance

Inspect the work against its acceptance criteria, raise a non-conformance the moment it fai…

3 مراحل10 منٹکھولیں
کوالٹی اور حفاظت

Toolbox talk and safety check

Brief the crew on the hazards this shift actually carries, capture who was there, then prov…

2 مراحل8 منٹکھولیں
کوالٹی اور حفاظت

Get a material submittal approved

Put the product you plan to buy in front of the designer with its data behind it, get it ch…

3 مراحل9 منٹکھولیں