কেস / এস্টিমেটিং ও কস্টিং
এস্টিমেটিং ও কস্টিং

প্রাক্কলনকে মঞ্জুরিকৃত পরিমাণের মধ্যে ধরে রাখুন

প্রাথমিক প্রাক্কলন ও তার অনুমোদন থেকে বিস্তারিত প্রাক্কলন ও তার প্রযুক্তিগত মঞ্জুরি পর্যন্ত কাজটি নিয়ে যান, কন্টিনজেন্সি দৃশ্যমান রাখুন, সীমার বিপরীতে প্রতিটি বিচ্যুতি ট্র্যাক করুন, এবং অর্থ ফুরিয়ে যাওয়ার পরে নয়, তার আগেই সংশোধনের জন্য আবেদন করুন।

5 ধাপ20 মিনিটডেভেলপার / ক্লায়েন্টপ্রকল্প / নির্মাণ ব্যবস্থাপনা ফার্মকস্ট কনসালটেন্সি / QS ফার্মজেনারেল কন্ট্রাক্টর

ধাপে ধাপে এটি যেভাবে কাজ করে

5টি ধাপ পুরো প্ল্যাটফর্ম জুড়ে - প্রতিটিতে আপনি কী করেন এবং কেন এটা গুরুত্বপূর্ণ।

1

Put up a preliminary estimate that says what it assumed

কনসেপচুয়াল এস্টিমেট

Build the early estimate from area rates or from comparable completed work, and record with it the scope assumed, the price level used and what is excluded. Carry that figure as the amount put up for approval.

কেন: The approved amount is fixed from this estimate and governs the job for years, so its assumptions matter more than its precision. An estimate that states what it left out can be revised for a stated reason; one that states only a number is revised for what looks like a mistake.

প্রবেশ করেThe scope as proposedPlinth area or comparable ratesবের হয়A preliminary estimate with its basisThe amount put up for approval
2

Build the detailed estimate and compare it with the approval

বিল অফ কোয়ান্টিটিজ

Measure and price the work in full on the governing schedule, then set the total beside the approved amount and account for the difference sub-head by sub-head rather than as one variance.

কেন: The gap between a preliminary and a detailed estimate is normal and is expected to be explained. Explaining it by sub-head shows whether the scope grew, the rates moved or the early estimate was thin, and only the first of those is a reason to revise the approval.

প্রবেশ করেWorking drawings and specificationThe governing schedule of ratesবের হয়A detailed estimate for technical sanctionWhere it sits against the approval
3

Keep the contingency visible and spend it deliberately

ভাতা ও কন্টিনজেন্সি

Hold the contingency as its own provision inside the sanctioned amount, with a note of what it is for, and record each drawing on it against the event that caused it.

কেন: Contingency spread into rates is spent invisibly and is gone before anyone knows it was being used. Held apart, it answers the only question that matters halfway through a job, which is how much room is left before the ceiling and what has already consumed the rest.

প্রবেশ করেWhat the job might still meetবের হয়Contingency as a stated provisionWho may draw on it and for what
4

Add the deviations up as they happen

পরিবর্তন আদেশ

Record every deviation with its value, whether it is an excess over a sanctioned quantity, a new item or a saving, and keep the cumulative effect against the sanctioned amount rather than against the last approved change.

কেন: Deviations are approved one at a time and consume the ceiling collectively, which is precisely the arithmetic nobody does in the moment. A running total is the only instrument that turns twelve reasonable individual decisions into a visible position.

প্রবেশ করেDeviations as they ariseবের হয়A running total against the ceilingHeadroom left, at any moment
5

Ask for the revision before the headroom is gone

রিপোর্ট

Report the position against the sanctioned amount at each period, and when the trend shows the ceiling being reached, produce the revised estimate with the reasons separated into scope, quantity and rate, and put it up while there is still room to work under the existing sanction.

কেন: A revision sought early is a technical submission with an answer to every question. One sought after the ceiling is passed is the same submission with an explanation attached for why work continued, and that explanation is what turns an ordinary cost increase into a finding against the department.

প্রবেশ করেThe position against the ceilingবের হয়A revised estimate with its reasonsAsked for while there is still headroom
মডিউল

এই প্লেবুকের মডিউল

190টি প্ল্যাটফর্ম মডিউলের মধ্যে 5টি

The market this case is written for

ভারত

Everything in this case follows how construction work is measured, priced and paid for in this market. The forms, the cost breakdown and the payment rules are the ones used there, not a generic version of them.

Standards it follows

  • CPWD DSR
  • IS 456
  • RERA

You do not have to set any of that up by hand. The first time you open the platform it asks which market you work in. Choose this one and it sets the interface language, loads the matching cost database and records the cost classification, and it adds an example project you can open straight away.

The rule checks for this market come with the platform too. Switch them on once and an estimate that misses something the market expects is flagged while you are still working on it, not after the tender has gone out.

এস্টিমেটিং ও কস্টিং-এ আরও

এস্টিমেটিং ও কস্টিং

Check an estimate before you send it

Put a priced bill through the validation rules, clear every warning and error, then export…

3 ধাপ8 মিনিটখুলুন
এস্টিমেটিং ও কস্টিং

Estimate from a cost database

Pull priced items from a real cost database, build the bill from them, bundle recurring bui…

4 ধাপ12 মিনিটখুলুন
এস্টিমেটিং ও কস্টিং

Set contingency from cost risk

Turn a single-point estimate into a range, run a Monte Carlo over the genuinely uncertain l…

3 ধাপ11 মিনিটখুলুন