เคส / คุณภาพและความปลอดภัย
คุณภาพและความปลอดภัย

Automate a check you keep doing by hand

Take the check you run manually every week, build it once as a pipeline from a ready-made template, lint it so nothing is quietly wired to nothing, and leave it in the library so it runs the same way every time.

4 ขั้นตอน14 นาทีผู้รับเหมาหลักบริษัทที่ปรึกษาด้านต้นทุน / QSบริษัทที่ปรึกษา BIM / ดิจิทัล

วิธีการทำงาน ทีละขั้นตอน

4 ขั้นตอนทั่วทั้งแพลตฟอร์ม - สิ่งที่คุณทำในแต่ละขั้นและเหตุผลที่สำคัญ

1

Start from a template

ตัวสร้าง Pipeline

Open the pipeline builder and take the ready-made graph closest to the check you do by hand: flag positions still at zero, list the costliest items, guard a budget ceiling, or gate an export behind validation. It lands on the canvas already wired and already runnable.

เหตุผล: An empty canvas is where most automation ideas die, because the first hour goes on working out which port feeds which. Starting from a graph that runs on the first click means you begin by reading logic that works, and change it, rather than guessing at logic that does not.

ปัจจัยนำเข้าThe check you do by handTemplate galleryผลลัพธ์A graph that already runsNamed pipeline
2

Point it at your own data

ตัวสร้าง Pipeline

Swap the template's source for your own bill, catalog or validation findings, then set the numbers that matter on this job: the ceiling the budget guard trips at, the figure a threshold gate compares against. Add a computed column, a group and total, a rename or a fan-out where the shape does not quite fit, and a non-empty guard so an empty source stops the run instead of passing it.

เหตุผล: A template carries the logic, never your project's numbers. A ceiling left at the demo figure passes everything you feed it, which is worse than having no guard at all, because the run goes green and everyone believes a check was done.

ปัจจัยนำเข้าTemplate graphYour bill or catalogผลลัพธ์Graph bound to real dataThresholds set for this job
3

Lint it, then run it

ตัวสร้าง Pipeline

Read the issue count before you press run. It flags any step whose required input has no incoming wire, and any node sitting on the canvas as an island with no wire at all. Clear those, run the pipeline, then read what each step actually did rather than just the final total.

เหตุผล: A step wired to nothing does not fail. It simply never runs, and the pipeline reports success while doing less than the canvas makes it look like it does. That is the failure worth hunting, because a green run is precisely what stops anyone looking again.

ปัจจัยนำเข้าWired graphRequired inputs per nodeผลลัพธ์Issue count at zeroA run with findings
4

Act on what it found

การตรวจสอบ

Take the findings through into validation, fix the positions they point at, and save the workflow so it shows up in the picker next month instead of being rebuilt from memory.

เหตุผล: Automation only pays back on the second run. A check that lives in one person's head gets skipped the week they are on leave, and on a long job that is reliably the week it would have caught something expensive.

ปัจจัยนำเข้าPipeline findingsThe positions they point atผลลัพธ์Corrected positionsA check that now runs itself
โมดูล

โมดูลในเพลย์บุคนี้

2 / 184 โมดูลของแพลตฟอร์ม

เพิ่มเติมใน คุณภาพและความปลอดภัย

คุณภาพและความปลอดภัย

ตรวจสอบงานและปิดความไม่สอดคล้อง

ตรวจงานเทียบกับเกณฑ์การยอมรับ ยื่นรายงานความไม่สอดคล้องทันทีที่พบว่าไม่ผ่าน ผลักดันการแก้ไขแ…

3 ขั้นตอน10 นาทีเปิด
คุณภาพและความปลอดภัย

การพูดคุยก่อนเริ่มงานและการตรวจสอบความปลอดภัย

บรรยายสรุปทีมงานเกี่ยวกับอันตรายที่กะงานนี้แบกรับจริงๆ บันทึกผู้เข้าร่วม แล้วพิสูจน์ด้วยการเ…

2 ขั้นตอน8 นาทีเปิด
คุณภาพและความปลอดภัย

ขอรับอนุมัติเอกสารนำเสนอวัสดุ

นำเสนอผลิตภัณฑ์ที่วางแผนจะซื้อให้ผู้ออกแบบพิจารณาพร้อมข้อมูลรองรับ ตรวจสอบเทียบกับรายการข้อก…

3 ขั้นตอน9 นาทีเปิด