سناریوها / کیفیت و ایمنی
کیفیت و ایمنی

ثبت regulated designs طبق Design and Building Practitioners Act

تصمیم بگیرید کدام نقشه‌ها regulated designs هستند، بررسی کنید هر practitioner برای دسته کاری که ادعا می‌کند ثبت‌شده باشد، construction issued designs و اظهارنامه‌های انطباق آن‌ها را جمع‌آوری کنید، پیش از شروع کار ساختمانی آن‌ها را ثبت کنید، تغییرات سایت را که regulated design جدیدی ایجاد می‌کنند بگیرید، و با اظهارنامه‌ای که occupation certificate به آن متکی است پایان دهید.

7 مرحله18 دقیقهپیمانکار عمومیدفتر طراحی / مهندسیسازنده / کارفرمادفتر مدیریت پروژه / ساخت

چگونه کار می‌کند، گام به گام

7 گام در سراسر پلتفرم - کاری که در هر گام انجام می‌دهید و چرا اهمیت دارد.

1

Decide which designs are regulated designs

مرجع بازبینی

Work through the design register and mark which documents are regulated designs, the ones covering building elements the regulation names, such as fire safety systems, waterproofing, and the internal and external load bearing components, together with the performance solutions that support them. Name the practitioner who will declare each one.

چرا: The list decides the whole workflow, and it is drawn once at the start when it is cheap. A document identified as regulated three months into construction needs a declaration from a practitioner who may not have been engaged on that basis, at a price nobody budgeted, for work that is already built.

ورودیDesign documents for the jobBuilding class and work typeخروجیList of regulated designsPractitioner responsible for each
2

Check the registration covers the class being declared

اعتبارنامه‌ها

Record each practitioner's registration, the classes of design work it authorises and its expiry, along with the professional indemnity cover the scheme requires. Check the registration against the class of the design they are being asked to declare, not simply that they hold one.

چرا: A declaration made by someone whose registration does not authorise that class of work is not a declaration, and the failure is invisible until it is checked. Registration also expires mid project, which turns a valid declaration into a problem on a date nobody was watching.

ورودیDesign team engagedClasses of design workخروجیRegistration checked per classExpiry and insurance dates watched
3

Collect the construction issued designs and their revisions

مدارک ارسالی

Run the regulated designs through the submittal register so each one arrives with its revision, its date and the practitioner who prepared it, and so a design still outstanding is visible as an outstanding item rather than as an absence nobody noticed.

چرا: What is lodged has to be the version that will actually be built from, and a register that tracks revisions is the only thing that keeps those two the same document. A declaration attached to a superseded revision is worse than none, because it reads as compliance while describing a building nobody is constructing.

ورودیConstruction issued drawingsList of regulated designsخروجیDesigns collected with revisionsMissing designs visible
4

Get a declaration for every regulated design

امضای الکترونیک

Collect a design compliance declaration signed by the registered design practitioner for each regulated design. Where a principal design practitioner has been appointed, they make the principal compliance declaration that the designs are covered and the declarations were made by practitioners authorised to make them.

چرا: The declaration is a personal statement by a named practitioner and it carries personal consequences, which is why it is chased rather than given. Collecting them as they are signed, against a list drawn at the start, is the difference between a routine administrative task and a search for six people at the end of a job.

ورودیDesigns collected with revisionsRegistration checked per classخروجیDesign compliance declarationsPrincipal declaration where appointed
5

Lodge them before the work they cover starts

ارسالی‌های مرجع

Lodge the construction issued regulated designs and their declarations through the state planning portal before building work commences, and keep the lodgement receipts against the submission record so the date can be shown rather than remembered.

چرا: The obligation is tied to the start of the work rather than to a milestone anybody celebrates, so the deadline arrives while the site is mobilising and everyone is busy with something else. Lodging late is not curable by lodging afterwards, because the record shows when the work started.

ورودیDesigns and declarationsPlanned start on siteخروجیLodged before work startsLodgement receipts on file
6

Treat a change on site as a new regulated design

مدیریت کیفیت

Route every change that touches a regulated design back through the same loop, a varied regulated design, a fresh declaration from a registered practitioner and a lodgement, before the varied work is built. Keep the link between the change and the design it varied.

چرا: This is the step the regime is most often failed on, and it fails quietly. Work built to a marked up sketch is work with no declared design behind it, and nothing on site looks wrong; the gap appears at the end, when the building is finished and the only remedies are expensive.

ورودیDesign change on siteWhat was lodged beforeخروجیVaried design declared againWhat was built matches what was declared
7

Close it out before the occupation certificate is applied for

بستن پروژه

Check the close-out register holds every regulated design, every declaration and every lodgement receipt, then have the registered building practitioner make the building compliance declaration that the work complies with the designs as declared.

چرا: The compliance declarations have to be in place before an application for an occupation certificate can be made, which means a single missing declaration holds up handover for a finished building. Every day of that is carrying cost on a project that has stopped earning.

ورودیAll declarations lodgedBuilding work completeخروجیBuilding compliance declarationReady to apply for occupation
ماژول‌ها

ماژول‌های این سناریو

7 / 190 ماژول پلتفرم

The market this case is written for

استرالیا

Everything in this case follows how construction work is measured, priced and paid for in this market. The forms, the cost breakdown and the payment rules are the ones used there, not a generic version of them.

Standards it follows

  • AS 4000
  • Security of Payment Act

You do not have to set any of that up by hand. The first time you open the platform it asks which market you work in. Choose this one and it sets the interface language, loads the matching cost database and records the cost classification, and it adds an example project you can open straight away.

The rule checks for this market come with the platform too. Switch them on once and an estimate that misses something the market expects is flagged while you are still working on it, not after the tender has gone out.

بیشتر در کیفیت و ایمنی

کیفیت و ایمنی

بازرسی کار و بستن یک عدم‌انطباق

کار را در برابر معیارهای پذیرش آن بازرسی کنید، همان لحظه رد شدن یک عدم‌انطباق ثبت کنید، اصلا…

3 مرحله10 دقیقهباز کردن
کیفیت و ایمنی

توجیه کوتاه ایمنی و بررسی ایمنی

گروه کاری را درباره خطراتی که این شیفت واقعاً حمل می‌کند توجیه کنید، ثبت کنید چه کسی حضور دا…

2 مرحله8 دقیقهباز کردن
کیفیت و ایمنی

دریافت تأیید مدرک ارسالی مصالح

محصولی که قصد خرید آن را دارید همراه با داده‌های پشت آن جلوی طراح بگذارید، آن را در برابر مش…

3 مرحله9 دقیقهباز کردن